|
Author
|
Topic: underwater door(cleopatra.wad
|
JAY2
Member Posts: 53
From:UK
Registered: Nov 2000
|
posted 04-05-2001 02:48 PM
  
This is the first time i have used the cleopatra wad.i have placed the underwater door and triggered it on a switch trigger but when i pull the switch nothing happens.
any ideas folks?.IP: Logged |
Nigel1985
Member Posts: 176
From:England
Registered: Feb 2001
|
posted 04-05-2001 02:50 PM
you must have messed the triggerin up, place the switch then select the switch, in the trigger menu selece switch and now place this trigger under your switch, if you select the trigger it should say something like switch:switchlever or something..next select the door and place the trigger for this ontop of the switch trigger, it should work now.hope this helpsNigel ------------------
Tomb Raider News
http://clik.to/tombraidernews Now with Level Editor help guides and much much more! IP: Logged |
JAY2
Member Posts: 53
From:UK
Registered: Nov 2000
|
posted 04-05-2001 03:12 PM
quote:
Originally posted by Nigel1985:
you must have messed the triggerin up, place the switch then select the switch, in the trigger menu selece switch and now place this trigger under your switch, if you select the trigger it should say something like switch:switchlever or something..next select the door and place the trigger for this ontop of the switch trigger, it should work now.hope this helpsNigel
i have tried that.
i am using the pully switch,i have set it as a switch trigger i have placed the door and triggered it on the same square as the switch but nothing happens.i also placed 3 skeletons around the room to trigger when i pull the switch and they work fine.i have even tried placing the door on either side of the portal but still nothing.
thanks anyway IP: Logged |
Nigel1985
Member Posts: 176
From:England
Registered: Feb 2001
|
posted 04-05-2001 03:21 PM
try lookin in the manual reference section cause i think they have stuff about pullies, it should be in there.Nigel ------------------
Tomb Raider News
http://clik.to/tombraidernews Now with Level Editor help guides and much much more! IP: Logged |
DaleR
Junior Member Posts: 9
From:
Registered: Mar 2001
|
posted 04-06-2001 04:08 AM
The "Underwater Door" is made to work without any trggers. You place it underwater and when Lara comes to it, she can pull it open. Adding a trigger to it makes it so it won't even work with Lara pulling it open.If you want a door underwater similar to the underwater door that will work with a trigger use Door_Type3. Hope that helps you out a bit....  IP: Logged |
JAY2
Member Posts: 53
From:UK
Registered: Nov 2000
|
posted 04-06-2001 01:36 PM
quote:
Originally posted by DaleR:
The "Underwater Door" is made to work without any trggers. You place it underwater and when Lara comes to it, she can pull it open. Adding a trigger to it makes it so it won't even work with Lara pulling it open.If you want a door underwater similar to the underwater door that will work with a trigger use Door_Type3. Hope that helps you out a bit....
Thanks DaleR i did wonder about lara opening the door herself but didnt now the trigger would cancel it. IP: Logged |
Eidos Interactive Forums
UBBFriend: Email This Page to Someone! 
